Modular Structures for Hazardous Locations, Modular Buildings, Portable Facilities, IN

PRODUCTS Modular
Office Systems Modular
Exterior Buildings Plumbed Modular
Buildings Modular Equipment
Enclosures Modular Laboratory
Facilities Modular Structures for
Hazardous Locations Closeouts

MADE WITH PRIDE
IN THE USA Security to the U.S. Capitol building was greatly enhanced by this Speed Space washroom application during renovation Guarantee

All Categories > Modular Office Systems > Plumbed Modular Buildings > Modular Exterior Buildings > Modular Equipment Enclosures > Modular Laboratory Structures > Modular Laboratory Structures

Printable Page Email

Email This Page

Save To Favorites


	Modular Laboratory Structures

Email This Page

Save To Favorites

larger image

Speed Space offers many options for controlled environment applications. Microbial and fungal resistant wall panels are available in several options. Choose from epoxy coated aluminum, stainless steel, FRP or our special line of EnviroGuard TM and CleanCote R panels, both from Citadel Architectural Products. Our laboratories are available with all steel construction with no wood, thus eliminating any chance for mold growth.

Is environmental control and fire suppression a requirement for your laboratory? No worry, Speed Space can provide positive or negative pressure air handling systems with HEPA filtration, air curtains and wet or chemical sprinkler systems. Other options include Pass-Thru Air Lock Doors and Dust Containment Cabinets.

All electrical components are UL listed and wiring installations comply with the National Electric Code. Speed Space has over 3 decades of experience in fabricating portable facilities for animal housing labs, environmental rooms, clean rooms, and testing facilities.

Exterior siding of modular buildings can be constructed from galvanized 29-gauge steel. Our portable units can be disassembled and installed easily. Off-site manufacturing capability enables us to meet quick delivery schedules without disrupting your operations. Speed Space Modular Laboratory Structures can be stacked, disassembled, and extended to meet your changing workspace requirements.

Specifications · Standard Specifications · Durability and Weather Resistant Features

Specifications

Capabilities		Assembly Delivery Design and Engineer Fabrication Inspection Installation

Applications		Animal Housing Labs Clean Rooms Environmental Rooms Microbiology Paint Mixing Rooms Propane Plants Testing Facilities

Modular Building Construction Materials		Aluminum Steel Wood

Wood Construction Materials		No.2 Grade Lumber Pine or Fir Spruce

Blast Overpressure		5 psi to 20 psi

Ceiling Height		7' to 10'

Standard Sizes		Length: 8' to 40' Width: 8' to 12'

Maximum Modular Structure Size		40' x 40'

Modular Building Weight		1,200 lbs to 14,000 lbs

Standard Window Size		46" x 27"

Standard Door Size		36" x 80"

Testing Capabilities		FSP Test V50 Test

Exterior Colors		Blue Brown Gray Green Red Tan White

Interior Wall Coverings		Beige Calcutta Gray Calcutta Tan

Standard Interior Floor Coverings		Ebony Nutmeg Sesame

Options		8' Ceiling Height and Higher Additional Doors and Windows Air Conditioning Air Conditioning with Heater Air Purifiers Base Board Heat Built-in Desks Carpeting Closets Computer Wiring Conduit (EMT) Wiring Custom Roof Decking Double Story Exhaust Fans Exterior Lighting First Aid Equipment In-Swing Doors Lockers More No Floors Partitions Phone Jacks Roof Overhangs Security Windows and Doors Sliding Windows vs. Picture Sloped Roof Smoke and Security Alarms Special Floor Coverings Special Windows Sprinkler Systems Tinted Windows Transformers Venetian Blinds Wainscot Washroom Facilities

Lead Time		3 to 4 weeks from the time of order.

Special Exterior Options		Exterior with Hip Roof Wood Exterior with Wood Mansard Steel Exterior with Slopped Roof Exterior with Slopped Overhang Roof Brick and Wood Exterior with Shingled Roof Brick and Steel Exterior with Steel Mansard Fiberglass Exterior with Radius Windows

Standards		Meet ballistic limits under MIL-STD-622F and MIL-P-46593A military standards. Explosion Resistant Structures are available in Class Division 1 & 2, Groups A, B, C, D, E, F, and G. Built to uniform building code specifications (Can build to specific code requirements upon request.) All electrical components are UL listed & all wiring is per National Electric Code (latest edition). Buildings comply with the applicable rules of the Indiana Fire Prevention and Building Safety Commission IC 22-15-4-2.

Industries Served		Automotive Distribution Centers Energy Government Buildings Manufacturing Medical/Dental Military Mining Oil Drilling Others Prisons/Correction Facilities Private/Public Schools Recycling Restaurants Steel Mills Universities

Standard Specifications

Standard Features		1/8" Industrial Floor Tile Complete Floor and Roof System Diffused Lighting Heavy Duty Vinyl Wall Covering Interior Receptacles More

Standard Options		Acoustical Accordion Doors And More Exhaust Fans Heating and Air Conditioning Hydraulic Door Closers Sprinklers Steel Doors

Perimeter Frame		Perimeter tubular 2" x 6" frame members (13 ga.) with structural steel “C” channel 2" x 8" set perpendicular to and inletted into side tubular bars. Channel is utilized as forkliftable slots for handling. All frame parts are coated with corrosive resistant (black) paint.

Metal Weather Shield		Galvanized steel construction. The shield covers the entire floor assembly and is located between frame and underside of floor joists.

Floor Joists		Joists are nominal 2 x 4 (1 1/2" x 3 1/2") spaced in a lateral configuration, 12" O.C. Lumber is #2 SPF or better.

Floor Insulation		Fiberglass batt-type insulation between floor joists is R-11 and entirely fills any and all voids.

Floor Decking		3/4" thick A.P.A rated plywood is fastened securely to floor joists with glue and ring shank nails (spaced approximately 4" O.C.). All seams are sanded smooth and filled as necessary.

Floor Covering		Vinyl composition floor tile 1/8" thick 12" x 12" squares are laid on the floor utilizing waterproof tile adhesive. Pattern full depth of tile.

Wall Studs		Studs are nominal 2 x 4 (1 1/2" x 3 1/2") space 16" O.C. Lumber is S.P.F. stud grade or better. Top plate is nominal 2 x 4 (1 1/2" x 3 1/2") fastened securely to studs. Bottom plate is nominal 2 x 4 (1 1/2" x 3 1/2") fastened securely to studs.

Wall Insulation		Fiberglass batt-type insulation between studs is R-11 and entirely fills any and all voids. Total R-value is R-14 with sheathing.

Interior Wall Covering		1/2" thick gypsum board with laminated vinyl covering is fastened to the inside of the studs with wide crown staples and gypsum adhesive; material has a class ‘A’ flame spread rating. 4" vinyl base cover.

Exterior Sheathing		Under steel siding structural sheathing is secured to entire exterior, per manufacturer’s recommendations. Sheathing is 1/8” structural thermo-ply.

Roof Framing		Rafters are nominal 2 x 4 (1 1/2" x 3 1/2") spaced in lateral configuration 16" O.C. Lumber is #2 SPF or better.

Interior Ceiling		Ceiling material is 1/2" gypsum with a white stucco pre-finish fastened securely to roof rafters with wide crown staples and screws. Material has a class ‘A’ flame spread rating.

Roof Insulation		Fiberglass batt-type insulation between roof rafters is R-11 and entirely fills any and all voids.

Exterior Roof Sheathing		The top side of the rafters has 7/16" sheathing fastened to roof rafters. Covered completely with a 4 mil. Polyvinyl vapor barrier.

Roof Covering		30 ga. Galvanized steel construction. Roof metal covers entire roof assembly.

Exterior Siding		Galvanized steel siding is 29 ga. Pre-finished (on both sides) commercial type with appropriate top and bottom trim fastener securely to studs. Seven standard colors are available. 40-year guarantee.

Windows		Windows are fixed glass (picture) type, double insulated glazing with vinyl extrusion around the perimeter. Windows are secured in place and sealed with a silicone-based sealant. Glazing is double 1/8". Sliding windows are optional.

Exterior Doors		Doors are a sandwich type construction with 0.019 aluminum on both faces and an interior core of foam and wood perimeter. A welded aluminum extrusion surrounds the assembly. This assembly is in turn pre-hung in an aluminum frame equipped with heavy-duty metal hinges. Door lite is fixed tempered glass single pane. Heavy-duty door closure included.

Full Depth Fork Pockets		All sizes 2 1/2" x 8" structural ‘C’ channel (3 1/2" x 7" opening).

Interior Light Fixtures		All light fixtures are 4'-0" (four foot) T8 twin tube with an acrylic wrap-around type diffuser cover.

Interior Ceiling Height		The dimension from the finished floor surface to the finished ceiling surface is 7'-0" (seven foot). 8' optional with 2 x 4 wall studs and R-11 insulation. Total R-value is R-14 with sheathing.

Electrical Service Panel		Pre-wire service entrance panel is equipped with a 60-amp main breaker, a 15-amp breaker (for lights), an additional 20-amp breaker (for receptacles), and any additional breakers necessary. Entrance conduit is through the exterior wall for ease of hook-up. All electric components UL listed and wired to National Electrical Code. Standard service is 240/120V, single-phase, 60 cycles.

Durability and Weather Resistant Features

Rain and Moisture Protection Options		All *Speed Space* buildings are designed for inside or outside use. Galvanized steel roof and under floor sheathing, double insulated glass windows, vapor barrier, moisture-proof sheathing assures excellent humidity control.

Wind, Cold, and Heat Insulation Options		Steel siding, structural thermal sheathing, full 3 1/2" insulation and thermal windows guarantee comfortable temperatures, even in the most severe weather.

Fire Resistant Options		Steel siding, roof and under floor sheathing, as well as gypsum interior, give *Speed Space* buildings a class ‘A’ flame spread rating on all surfaces. Sprinkler systems and totally non-combustible units available.

Noise Control Options		Structural sheathing, gypsum interior, and thermal windows create a decibel drop in the 25 to 30 decibel range, standard with windows and doors. For extreme conditions, optional sound control is available (triple-glazed windows, soundboard, and carpeting).

Damage Protection Options		Exterior steel siding with baked finish on both sides (40-year guarantee), structural sheathing, 1/8" industrial floor tile, heavy-duty vinyl interior walls, and a 4" rubber base molding all help to control accidental or deliberate damage. Doors are heavy-duty with kick plate, lite, and closure.

MORE IMAGES


	· Modular Paint Mix Room

	· Laboratory Eye Wash Sink

	· Explosion Resistant Laboratory

	· Chemical Resistant Laboratory

	· Laboratory Testing Facility

	· Exterior Laboratory Testing Facility

Modular Laboratory Structures

Capabilities

Applications

Modular Building Construction Materials

Wood Construction Materials

Blast Overpressure

Ceiling Height

Standard Sizes

Maximum Modular Structure Size

Modular Building Weight

Standard Window Size

Standard Door Size

Testing Capabilities

Exterior Colors

Interior Wall Coverings

Standard Interior Floor Coverings

Options

Lead Time

Special Exterior Options

Standards

Industries Served

Standard Features

Standard Options

Perimeter Frame

Metal Weather Shield

Floor Joists

Floor Insulation

Floor Decking

Floor Covering

Wall Studs

Wall Insulation

Interior Wall Covering

Exterior Sheathing

Roof Framing

Interior Ceiling

Roof Insulation

Exterior Roof Sheathing

Roof Covering

Exterior Siding

Windows

Exterior Doors

Full Depth Fork Pockets

Interior Light Fixtures

Interior Ceiling Height

Electrical Service Panel

Rain and Moisture Protection Options

Wind, Cold, and Heat Insulation Options

Fire Resistant Options

Noise Control Options

Damage Protection Options